Replacing Lead Pipes in Stratford
Replacing a lead supply pipe is usually a one-day job: a new plastic (MDPE) pipe is moled or trenched from the boundary to the house, connected, and the lead run abandoned in the ground.
How the job runs
- Route agreed and services scanned
- New MDPE pipe installed — moling is standard under drives and paths
- Internal connection to the stopcock, external connection at the boundary
- The water company transfers or renews their side per their scheme
Disruption, honestly
Expect a pit at the boundary, an entry point at the house, and the water off for an hour or two at connection. Moling avoids the trench; reinstating two pits is a far smaller job than relaying a driveway.
Choosing the route
Three ways in: mole along the old line (the default under anything paved), open-cut where the run is short and soft, or a new entry point — often better than following a lead pipe that runs under the house, and the moment to reroute anything an extension will later sit over.
Inside the house on the day
Expect the internal stopcock renewed with the connection, the water off for an hour or two, and a few minutes of cloudy water as air clears. Run the kitchen cold tap until it runs clear before drinking — normal commissioning, not a fault.
The old pipe stays in the ground — this is standard practice
Nobody excavates the length of the garden to remove dead lead: the old run is disconnected at both ends, capped, and abandoned in place — standard, safe and universal, because lead in soil beside a pipe is not lead in your glass. What matters is the disconnection being total: no forgotten tee still feeding an outside tap, no live stub behind the old stop tap. The completion photos worth keeping show both capped ends. If a future project ever unearths the old pipe, it can simply be scrapped — it causes no further issues.
Get quotes for replacing lead pipes in Stratford
Local water facts for Stratford
Water supply: Thames Water · www.thameswater.co.uk · 0800 316 9800
Wastewater & sewers: Thames Water
Postcode districts covered: E15, E3, E7, E13, E9, E10, E11, E5, E16, E14, E12, E8
Water hardness: Hard (High limescale risk). Scale from hard water builds up inside supply pipework and appliances over time, which is worth knowing when repairing or replacing pipe.
Most properties in Stratford are supplied by Thames Water, although this can vary by postcode. Water hardness in Stratford is typically Hard (High limescale risk). Common local postcode districts include E15, E3, E7 and nearby districts.
Who owns which pipe in Stratford: the supply pipe from the boundary stopcock into the property belongs to the property owner; the water main in the road and the communication pipe up to the boundary belong to Thames Water. Contractors on WaterTrust handle the private side — for a fault on the company's side, report it to Thames Water instead of paying anyone.
Common questions
Do I need the water company's permission?
You must follow their connection and notification process — contractors doing this weekly handle it, and the company's details for this area are below.
What pipe replaces the lead?
Blue MDPE, sized to the property — which often improves pressure and flow at the same time as removing the lead.
Should the internal plumbing change too?
If lead exists inside the property, plan its replacement as well; the supply pipe is the priority because all drinking water passes through it.
Can I replace just part of the lead run?
You can, but you shouldn’t — any lead left in the run continues to affect the water, and part-jobs rarely qualify for the company scheme. Full run or wait until you can.
How soon can we drink the water?
Same day — flush each cold tap for a few minutes first. New MDPE needs no curing time; the flush just clears installation debris and air.
Who is responsible for this work in Stratford?
The supply pipe from the boundary stopcock into the property belongs to the property owner; the water main in the road and the communication pipe up to the boundary belong to Thames Water. Contractors on WaterTrust handle the private side — for a fault on the company's side, report it to Thames Water instead of paying anyone.
How do quotes work on WaterTrust?
You post the job once, free, with no account needed. Up to 4 vetted contractors covering Stratford and the wider E15, E3, E7, E13, E9, E10, E11, E5, E16, E14, E12, E8 area contact you with quotes — you are never charged. You deal with the contractor directly — WaterTrust makes the introduction; it never resells or subcontracts your job.
Ready to get quotes?
Post the job free in about a minute. Up to 4 vetted contractors reply with quotes — no obligation.
You may also be interested in
Replacing Lead Pipes advice nearby: Plaistow · Bow · Forest Gate · Leyton · East London
